Recording To A Tape; Cd Synchro Recording/Recording Manually/Program Edit - Sony CHC-TB10 Operating Instructions Manual

Recording to a tape

— CD Synchro Recording/Recording Manually/Program Edit

You can record from a CD or radio (or connected components). You can use TYPE I (normal) tapes.
The recording level is adjusted automatically.
Steps Recording from a CD
(CD Synchro Recording)
1
Load a recordable tape.
2
Press FUNCTION repeatedly to
select "CD".
3
Load the CD you want to record.
4
Press CD SYNC.
The tape deck stands by for recording.
When you want to record on the bottom side, press TAPE nN.
5
Press TUNER MEMORY/DIRECTION repeatedly to select g to record on one
side. Select h (or j) to record on both sides.
6
Press REC PAUSE/START.
To stop recording
Press x.
Note
You cannot listen to other sources while recording.
GB
16
Recording from a CD (or a connected
component) /radio manually
Press FUNCTION repeatedly to select the
desired source to record.
Load the CD (or other audio source), or
tune in the station you want to record.
Press REC PAUSE/START.
Press REC PAUSE/START, and then start
playing the desired source.
Tips
• When you record on both sides, be sure to start
from the top side. If you start from the bottom side,
recording stops at the end of the bottom side.
• For recording from the radio:
If noise is heard while recording from the radio,
move the respective antenna to reduce the noise.