Fading In Or Out - Sony CDP-CX260 Operating Instructions Manual

Loading the Disc Memos of the second CD
player
If the second CD player has the Disc Memo function
(see page 29), you can load the Disc Memos of the
second CD player into this player's memory and
display them on this player.
1
Press INPUT.
2
Turn the JOG dial until "LOAD 2ND MEMO"
appears in the display.
ALL DISCS
CD1
L O A D 2 N D M E M O
3
Push the JOG dial.
This player starts loading. (Loading takes about
one minute.)
Note
If each Disc Memo of the second CD player has more than 13
characters, only the first 13 characters of that Disc Memo is
loaded into this player.
Labeling discs of the second CD player
You can label discs of the second CD player or change
the Disc Memos loaded from the second CD player.
1
Press MEGA CONTROL.
The MEGA CONTROL button lights up.
2
Turn the JOG dial to select the disc you want to
assign a Disc Memo to.
If the disc slot you select does not have any disc,
"NO DISC" appears in the display and you cannot
assign a Disc Memo.
3
Press INPUT.
"DISC MEMO" appears.
4
Push the JOG dial.
5
Input the new Disc Memo following the procedure
in "Labeling Discs" on page 29.
Note
The new Disc Memos are stored on this player's memory, so
you cannot display them on the second CD player.
Getting Started Playing CDs

Fading In or Out

You can manually fade the sound in or out to prevent
tracks from starting or ending abruptly.
Note that you cannot use this effect when you use the
DIGITAL OUT (OPTICAL) connector.
FADER
To
Press FADER
Start play fading in During pause. "FADE" appears in
the display and the Q indication
flashes. The play fades in.
End play fading out
When you want to start fading out.
"FADE" appears in the display and
the q indication flashes. The play
fades out and the player pauses.
Note
Fading lasts for about 5 seconds.
Playing CDs Playing CDs
27