Locating A Specific Disc - Sony CDP-CX260 Operating Instructions Manual

Playing CDs

Locating a Specific Disc

Locating a disc on the player
Turn the JOG dial until the desired disc number or
Disc Memo (see page 29) appears in the display. Push
the JOG dial to start play.
Locating a disc searching for a specific Disc
Memo (Memo Search)
You can search for and locate a desired disc by
inputting the first character used in the Disc Memo (see
page 29).
1
Press MEMO SEARCH.
"MEMO SEARCH" appears in the display.
2 Press ≠/± repeatedly to input the first
character.
ALL DISCS
S O N Y H I T S
16
MEMO SEARCH
≠/±
S
CD1
Input character
Each time you press ≠/±, the characters
appear in the following order.
JOG A B C D E F G H I J K L M N O P Q R S T U V W X
Y Z 0 1 2 3 4 5 6 7 8 9
If "NOT FOUND" appears in the display while
inputting the first character with the ≠/±
buttons, no disc has been labeled using the input
character.
Notes
• When searching for input characters, blanks and
symbols before the first character in the Disc Memo are
ignored.
• When searching for input characters, upper and lower
cases cannot be differentiated.
3
Turn the JOG dial to find the desired disc.
As you turn the JOG dial, the Disc Memos starting
with the input character appear in the display.
4
Push the JOG dial to select the disc.
In Program Play mode, the disc will be added to
the end of the program.
To cancel Memo Search
Press MEMO SEARCH again.
If there are no more Disc Memos starting with the
input character in Step 3
The input character search changes to the next one in
alphabetical order when you turn the JOG dial.