Tips On Editing Tapes; Fading Out After A Desired Duration - Time Fade - Sony CDP-C425 Operating Instructions Manual

Tips on Editing Tapes
The following functions are convenient for editing your own
tapes.
Fading in/Fading out
You can have the play fade in and fade out between 2-10
seconds.
When no time is specified, the play will fade in and fade
out for 5 seconds.
To set the fade time
1 Press E.
2 Press FADER.
3 Press <<4/P to select fade time between 2-10
seconds.
4 Press FADER again.
To end the play fading out
Press FADER when you want to start fading out.
we- flashes in the window, and play fades out and unit
enters the pause mode.
To restart the play fading in
Press FADER in the pause mode.
<a flashes in the window, and play fades in.
Fading out after a desired
duration - Time Fade
You can have the play fade out at the end by designating
the play duration. Once time fade is set, it functions twice
for editing both sides of a tape. You can change discs
without canceling this function. The fade time is preset to
5 seconds, but you can change it between 2-10 seconds.
To set time fade
1 Press EDIT/TIME FADE twice during stop.
al is displayed in the window.
2 Specify desired fade time.
a) When you specify a commercially available tape
length:
You can designate the tape length easily with the
i<¢</PPI buttons. Each time you press a button, the
time changes in the following way.
Press ed Press PPi
C C-90 (45.00 min.) C-46 (23.00 min.) 3
C-74 (37.00 min.) — C-60 (30.00 min.) — C-54 (27.00 min.)
To set the seconds, press <<4/PP. The time
increases or decreases by 10 seconds.
b) When you specify a free tape length:
¢ For the CDP-C325, this step can be operated with
the remote commander only.
¢ This step cannot be operated by the CDP-C225.
Use numeric buttons (1]-[10]). Press [10] for "o".
You need not press keys for seconds, unless
required.
Example: To set to 27 minutes, press [2]
Note
Total playing time can be set up to 59 minutes 59 seconds.
(For the CDP-C228, total playing time can be set up to 59 minutes
50 seconds.)
3 To start play, press P.
After the designated time, play fades out and pauses.
Tape side B lights up. Press Bi or > to resume playing
for the other side of the tape. If you press FADER, fade
in will start. When the play fades out for the second
time, the unit pauses and the time fade function is
canceled.