Adjusting The Sound; Changing The Display - Sony 3-287-077-14(2) Operating Instructions Manual

Adjusting the sound

Use the controls on the unit for this
operation.
To add a sound effect
To Press
Reinforce the GROOVE repeatedly
bass and create until "GROOVE"* or
a more powerful "Z-GROOVE"* lights up
sound in the display.
Select the SURROUND repeatedly
surround effect until "SURROUND"
lights up in the display.
Select a preset PRESET EQ (or EQ on
sound effect the remote) repeatedly. To
cancel, press PRESET EQ
(or EQ on the remote)
repeatedly until "FLAT"
appears.
Enhance the OPTIONS and turn
sound quality of OPERATION DIAL to
the audio file select "MP3
BOOSTER+", then press
ENTER. Turn
OPERATION DIAL to
select "AUTO", then press
ENTER.**
* The volume switches to power mode and the
equalizer curve changes.
**"BOOSTER" lights up in the display when
the MP3 BOOSTER+ effect is activated.
To turn on the subwoofer
(MHC-GT555, MHC-GT444 and
LBT-ZT4 only)
Press SUBWOOFER repeatedly until the
SUBWOOFER indicator on the unit lights
up. If you later disconnect the subwoofer,
repeat the procedure until the
SUBWOOFER indicator on the unit lights
off. The volume of the subwoofer is
linked to the front speakers.

Changing the display

Use the controls on the unit for this
operation.
1
Press OPTIONS.
2
Turn OPERATION DIAL to select
the item you want.
ILLUM
Change the power illuminator pattern
around MASTER VOLUME.
M-BACKLIGHT (Meter backlight)
Change the Meter Backlight pattern.
MTR POINTER (Meter pointer)
Change the Meter Pointer pattern.
DISPLAY (Front panel display)
Change the front panel display pattern.
3
Press ENTER.
4
Turn OPERATION DIAL to select
the setting you want, then press
ENTER.
5
Repeat steps 2 through 4 to
make other settings.
To exit the OPTIONS menu
Press OPTIONS again.
To return to the previous display
Press RETURN.
25 GB