Sony STR-DN1010 Operating Instructions Manual page 94

To output test tone from
adjacent speakers
You can output test tone from adjacent
speakers so that you can adjust the balance
between the speakers.
1
Press B/b repeatedly to select "Phase
Noise", then press
2
Press V/v repeatedly to adjust the
parameter, then press
• OFF
• LH/FR, LH/RH, FL/RH, FL/SR, SL/FL,
SB/SL, SBL/SL, SBR/SBL, SR/SB,
SR/SBR, SR/SL, FR/SR, FR/SL,
CNT/FR, FL/CNT
Lets you output the test tone sequentially
from adjacent speakers.
Some items may not be displayed,
depending on the setting of the speaker
pattern.
3
Press V/v repeatedly to adjust the
speaker level, then press
To output the source sound
from adjacent speakers
You can output the source sound from
adjacent speakers so that you can adjust the
balance between the speakers.
1
Press B/b repeatedly to select "Phase
Audio", then press
2
Press V/v repeatedly to adjust the
parameter, then press
• OFF
• LH/FR, LH/RH, FL/RH, FL/SR, SL/FL,
SB/SL, SBL/SL, SBR/SBL, SR/SB,
SR/SBR, SR/SL, FR/SR, FR/SL,
CNT/FR, FL/CNT
Lets you output front 2 channel source
sound (instead of the test tone)
sequentially from adjacent speakers.
Some items may not be displayed,
depending on the setting of the speaker
pattern.
3
Press V/v repeatedly to adjust the
speaker level, then press
GB
94
.
.
.
.
.
.
When a test tone is not output
from the speakers
• The speaker cords may not be connected
securely. Check to see if they are connected
securely and cannot be disconnected by
pulling on them slightly.
• The speaker cords may have the short-circuit
problem.
When a test tone is output from
a different speaker than the
speaker displayed on the TV
screen
The speaker pattern to the connected speaker
is not set up correctly. Make sure the speaker
connection and the speaker pattern match.
D.Range Comp (Dynamic range
compression)
Lets you compress the dynamic range of the
soundtrack. This may be useful when you want
to watch movies at low volumes late at night.
Dynamic range compression is possible with
Dolby Digital sources only.
x MAX
The dynamic range is compressed
dramatically.
x STD
The dynamic range is compressed as intended
by the recording engineer.
x AUTO
The dynamic range is applied automatically
with Dolby TrueHD source or other source is
set to "OFF".
x OFF
The dynamic range is not compressed.