Sony STR-DN1010 Operating Instructions Manual page 47

To activate the muting function
Press MUTING (RM-AAP051 only) or
(RM-AAP052 only) on the remote.
You can also use MUTING on the receiver.
The muting function will be canceled when
you do the following.
• Press MUTING (RM-AAP051 only) or
(RM-AAP052 only) again.
• Increase the volume.
• Turn off the receiver.
• Perform Auto Calibration.
To avoid damaging your
speakers
Before you turn off the receiver, be sure to turn
down the volume level.
Naming the input (Name Input)
You can enter a name of up to 8 characters for
inputs and display it.
This is convenient for labeling the jacks with
the names of the connected components.
1
Press V/v repeatedly on the
"Input" screen to select the
input you want.
2
Press TOOLS/OPTIONS.
The option menu appears.
3
Press V/v repeatedly to select
"Name Input", then press
BD
Input
DVD
SAT/CATV
TV
VIDEO 1
4
Press V/v/B/b to select a
character, then press
The name you entered is registered.
.
Input Assign
Name lnput
.
To cancel naming input
Press RETURN/EXIT O.
Viewing information on the
display
You can check the sound field, etc., by
changing the information on the display.
DISPLAY
Press AMP, then press DISPLAY
repeatedly.
You can also use DISPLAY on the receiver.
Each time you press DISPLAY, the display
will change as follows.
Input name you selected
name t Sound field currently applied t
Volume level t Stream information
FM and AM band
Program Service name
a)
t Frequency t Program Type
name
b)
t Radio Text indication
indication
Current Time indication (in 24-hour system
b)
t Sound field currently applied t
mode)
Volume level
AMP
a)
t Original input
b)
or preset station
b)
t
continued
GB
47