Sony STR-DN1010 Operating Instructions Manual page 40

2: Performing Auto Calibration
MUTING/
1
Press GUI MODE.
After "MENU ON" appears on the
display for a while, "GUI" appears and
the GUI menu appears on the TV screen.
Press MENU if the GUI menu does not
appear on the TV screen.
2
Press V/v repeatedly to select
"Settings", then press
The Settings menu list appears on the TV
screen.
3
Press V/v repeatedly to select
"Auto Cal.", then press
GB
40
4
Press V/v repeatedly to select
"Auto Cal. Start", then press
5
Press
?/1
6
The measurement starts in five
seconds.
Input
buttons
GUI
MODE
7
Measurement starts.
V/v/b,
The measurement process will take
approximately 30 seconds with a test
tone. Wait until the measurement process
MENU
completes.
MASTER
VOL +/–/
2
+/–
Tips
• Operations other than turning the receiver on or off
are deactivated during the measurement.
• The measurements may not be performed correctly
or Auto Calibration cannot be performed when
special speakers, such as dipole speakers are used.
or b.
or b.
or b.
to select "START".
Auto Calibration
Count Down
Please press enter key
to stop.
5
CANCEL
RETURN
Auto Calibration
TONE T.S.P. WOOFER