Sony STR-DG300 Operating Instructions Manual page 6

About the indicators on the display
1 2 3
;
SP A
LFE
SW
SP B SLEEP OPT COAX
L C R
SL SR
qf
Name Function
A SW
Lights up when you press
WOOFER ON/OFF on the
receiver to turn on the sub
woofer and the audio signal is
output from the SUB WOOFER
jack.
B LFE
Lights up when the disc being
played back contains an LFE
(Low Frequency Effect)
channel and the LFE channel
signal is actually being
reproduced.
C SP A/SP B
Lights up according to the
speaker system used. However,
these indicators do not light up
if the speaker output is turned
off or if a headphone is
connected.
D ;DIGITAL
Lights up when Dolby Digital
signals are input.
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that INPUT MODE is not
set to "ANALOG" (page 38).
E DTS
Lights up when DTS signals are
input.
Note
When playing a DTS format
disc, be sure that you have made
digital connections and that
INPUT MODE is not set to
"ANALOG" (page 38).
F MEMORY
Lights up when a memory
function, such as Preset
Memory (page 35), etc., is
activated.
6 GB
4
DIGITAL
qd qs qa
5
DTS
D.RANGE STEREO MONO
q;
Name Function
G A.DIRECT
Lights up when ANALOG
DIRECT is selected (page 31).
H Preset
Lights up when using the
station
receiver to tune in radio stations
indicators you have preset. For details on
presetting radio stations, see
page 35.
I Tuner
Lights up when using the
indicators receiver to tune in radio stations
(page 32), etc.
J D.RANGE
Lights up when dynamic range
compression is activated (page
27).
K COAX
Lights up when INPUT MODE
is set to "AUTO IN" and the
source signal is a digital signal
being input through the
COAXIAL jack, or when
INPUT MODE is set to "COAX
IN" (page 38).
L OPT
Lights up when INPUT MODE
is set to "AUTO IN" and the
source signal is a digital signal
being input through the
OPTICAL jack, or when
INPUT MODE is set to "OPT
IN" (page 38).
M SLEEP
Lights up when the sleep timer
is activated (page 39).
6 7
RDS
MEMORY
A.DIRECT
9
8