Learning The Commands Of Your Components - Sony STR-DE998 Operating Instructions Manual

To control a satellite tuner or
cable box
Maker
SONY
JERROLD/G.I.
PANASONIC
RCA
S. ATLANTA
To control a tuner
Maker
SONY
To control a hard disc recorder
Maker
SONY
To control a blu-ray disc recorder
Maker
SONY
To control a PSX
Maker
SONY
Code(s)
801, 802, 803, 804
806, 807, 808, 809, 810,
811, 812, 813, 814
818
805, 819
815, 816, 817
Code(s)
002, 003, 004, 005
Code(s)
307, 308, 309
Code(s)
310, 311, 312
Code(s)
313, 314, 315
Learning the commands of
your components
By using the Learning function, it is possible for
this remote to perform learned commands.
Setting remote control codes
that are not stored in the remote
When a remote control code is not one of the
presets stored in the remote, it is possible for the
remote to learn the code using the Learning
function.
1
Hold down RM SET UP and press
TV ?/1.
The indicator lights up and "LEARN"
appears in the display.
2
Move the Easy scroll key (PUSH) to
select the input (including TV ?/1) for
the component you want to control.
For example, if you are going to learn an
operation for a CD player, select
SA-CD.
3
Press PUSH.
4
Press the button you want to use for
the Learning function.
The indicator turns off while a valid button
is pressed, then flashes slowly.
5
Point the remote control code receiver
section of the remote towards the
receiver/transmitter on the remote
control to be learned.
5–10 cm
continued
53 US