Specifications - Sony STR-DE998 Operating Instructions Manual

Specifications

AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(Models of area code U only)
With 8 ohm loads, both channels driven, from
20 – 20,000 Hz; rated 110 watts per channel
minimum RMS power, with no more than
0.09% total harmonic distortion from 250
milliwatts to rated output.
Amplifier section
Power output
Models of area code U, CA
Rated Power Output at Stereo Mode
(8 ohms 20 Hz – 20 kHz, THD 0.09%)
(8 ohms 1 kHz, THD 0.7%)
(8 ohms 1 kHz, THD 10%)
Reference Power Output
(8 ohms 20 Hz – 20 kHz, THD 0.09%)
2)
FRONT :
2)
CENTER :
2)
SURR :
2)
SURR BACK :
(8 ohms 1 kHz, THD 0.7%)
2)
FRONT :
2)
CENTER :
2)
SURR :
2)
SURR BACK :
(8 ohms 1 kHz, THD 10%)
2)
FRONT :
2)
CENTER :
2)
SURR :
2)
SURR BACK :
1) Measured under the following conditions:
Area code
U, CA
2) Depending on the sound field settings and the
source, there may be no sound output.
US
60
1)
110 W + 110 W
1)
120 W + 120 W
1)
150 W + 150 W
1)
110 W/ch
110 W
110 W/ch
110 W/ch
120 W/ch
120 W
120 W/ch
120 W/ch
150 W/ch
150 W
150 W/ch
150 W/ch
Power requirements
120 V AC, 60 Hz
Frequency response
PHONO
MULTI CH IN,
SA-CD/CD, TV/SAT,
MD/TAPE, DVD,
VIDEO 1, 2, 3
Inputs (Analog)
PHONO
MULTI CH IN,
SA-CD/CD, TV/SAT,
MD/TAPE, DVD,
VIDEO 1, 2, 3
3) INPUT SHORT (with sound field and equalizer
bypassed).
4) Weighted network, input level.
Inputs (Digital)
DVD, SA-CD/CD
(Coaxial)
TV/SAT, SA-CD/CD,
MD/TAPE, VIDEO 3
(Optical)
Outputs (Analog)
MD/TAPE (OUT),
VIDEO 1, 2
(AUDIO OUT)
SUB WOOFER
Outputs (Digital)
MD/TAPE (Optical)
Equalizer
Gain levels
RIAA equalization curve
±0.5 dB
10 Hz – 70 kHz
+0.5/–2 dB (with sound
field and equalizer
bypassed)
Sensitivity: 8 mV
Impedance: 50 k ohms
3)
S/N : 86 dB
4)
(A, 8 mV )
Sensitivity: 500 mV
Impedance: 50 k ohms
3)
S/N : 96 dB
4)
(A, 500 mV )
Sensitivity: –
Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
Sensitivity: –
Impedance: –
S/N: 100 dB
(A, 20 kHz LPF)
Voltage: 500 mV
Impedance: 10 k ohms
Voltage: 2 V
Impedance: 1 k ohm
Sensitivity: –
±10 dB, 0.5 dB step