(User Ir Setting) - Sony STR-DE805G Operating Instructions Manual

Preparing and Using the Remote
• Some IR codes may not have been successfully
programed, even if "RELEASE YOUR COMMANDER"
appears on the TV screen. In this case, try programing the
IR code again. If the IR code still cannot be programed,
follow the procedure described in "Programming Other
Infrared (IR) Codes (USER IR setting)" on page 22.
• The unit may not be able to record IR codes with special
waveforms produced on some remotes.
Notes
• Do not register the same type of component (i.e., an LD
player) at several different functions.
• The unit emits an IR signal that cancels the automatic
playback function of program sources, such as laser disc
and CD players, designed to start playing the moment
they are turned on. To activate the auto play feature, set
the receiver's AUTO PLAY function to on.
• Keep the infrared sensor away from fluorescent light or
direct sunlight. Otherwise, the IR codes may not be
recorded.
• Even if the power cord has been disconnected from the
AC power outlet, recorded IR codes will stay in the
memory for approximately two weeks. If they disappear,
"ALL CLEAR!" will appear on the TV screen the next time
you turn on the receiver.
• Do not operate the remote supplied with the STR-DE805G
when "PUSH YOUR COMMANDER" appears on the TV
screen in step 6. Programing IR codes from the supplied
remote may cause the STR-DE805G to malfunction.
22 EN
Programming Other Infrared
(IR) Codes (USER IR setting)
Use the USER IR CODE SETTING menu to program
any IR codes that could not be programed in
"Registering Audio/Video Equipment". These can
include codes for audio and video equipment, as well
as other types of equipment, made by almost any
manufacturer. The following procedure lets you to
program up to 20 USER IR codes.
1
Click FUNCTION in the main menu.
2
Click USER IR.
FUNCTION SELECT
VIDEO 1
VIDEO 2
VIDEO 3
L D
TV / DBS
MACRO 1
USER IR
3
Click A B C D to select a user IR code page, then
click INDEX.
USER IR CODE SETTING
RETURN
4
Spell out a name for the IR code by clicking each
character in order. The name is stored
automatically.
USER IR CODE SETTING
A B C D
F G H I
K L M N
P Q R S
U V W X
CAPS
RETURN
To enter a space
Click the space bar.
DAT/MD
CD
TUNER
PHONO
TAPE
MACRO 2
EXIT
A B C D
INDEX
EXIT
B b
E 1 2 3
J 4 5 6
O 7 8 9
T / 0
*
Y Z – +
EXIT