External Monitor Port - Fujitsu LifeBook S Series Manual

EXTERNAL MONITOR PORT

The external monitor port allows you to connect
an external monitor. In order to connect an
external monitor follow these easy steps:
1. Align the connector with the port opening.
2. Push the connector into the port until it is
seated.
3. Tighten the two hold-down screws, located
on each end of the connector.
Pressing the [Fn] + [F10] keys allows you to
change your selection of where to send your
display video. Each time you press the key
combination, you will step to the next choice,
starting with the built-in display panel only,
moving to the external monitor only, finally
moving to both the built-in display panel and
an external monitor.
LB_GARLICS 04 (48-56) 55
U s e r - I n s t a l l a b l e Fe a t u r e s
21/7/03, 6:26 PM
55