Front Panel Components; Attaching The Port; Detaching The Port Replicator - Fujitsu LifeBook S Series Manual

FRONT PANEL
COMPONENTS
The following is a brief description of the Port
Replicator's front panel components.
Docking Port
The docking port connects the Port Replicator
to your notebook. (Figure 4-13)
Port Replicator Release Latch
Slide the Port Replicator Release button to
remove the Port Replicator from your notebook.
(Figure 4-13)
Do not hold the system by the Port Replicator.
The Port Replicator and/or the system could
be damaged if the Port Replicator is used as
a handle.

ATTACHING THE PORT

The Port Replicator can be attached on your
notebook while the power is on, while in suspend
mode, or while the power is off. To attach the
Port Replicator follow these easy steps:
1. Align the Port Replicator connector on the
lower surface of your notebook with the
connector on top of the Port Replicator.
2. Push your notebook down to connect it to
the Port Replicator securely. (Figure 4-14)
LB_GARLICS 04 (48-56)
Docking Port
Figure 4-13. Port Replicator front panel
51
U s e r - I n s t a l l a b l e Fe a t u r e s
Port Replicator Release Latch
Figure 4-14. Attaching the Port Replicator
DETACHING THE PORT
REPLICATOR
The Port Replicator can be detached from your
notebook while the power is on, while in suspend
mode, or while the power is off. To detach the
Port Replicator follow these easy steps:
1. Slide the Port Replicator's release button to
the right to release the lock. (Figure 4-15)
2. Lift up your notebook to detach it from the
Port Replicator.
Figure 4-15. Detaching the Port Replicator
21/7/03, 6:26 PM
51