3. Execute/Correct Program
Select/Trace Program
PROGRAM
MANAGER
Programs
Execute
Note
At least the following conditions must be satisfied when the
program is started:
•
No alarms pending.
•
The feedrate enable is present.
•
The spindle enable is present.
[M]
POSITION
Trace
Note
As for the simulation, functions for various display settings
are also available here (Zoom, To origin, ...).
3-20
Select PROGRAM MANAGER
operating area.
Select program directory.
Use the cursor to select the
program in the program
directory and
select the program for
execution.
Select "Automatic" mode
Start the program with
NC start.
Trace machining on the
screen
Possibly select the
[M] POSITION operating area.
Start tracing.
Start the program with
NC start.
The workpiece machining is
displayed simultaneous to the
machine on the screen.
© Siemens AG, 2001. All rights reserved
SINUMERIK 802D Milling ISO Dialect M (ISF) - Edition 09.01
09.01