Copy/Insert/Delete Block - Siemens SINUMERIK 802D Short Manual

2. Create/Edit Program

Copy/Insert/Delete Block

Prerequisite:
Existing program is open.
Mark
block
Copy
block
Insert
block
Notes
•
Blocks are always copied behind the cursor.
•
Blocks can also be copied and inserted between
different programs.
Prerequisite:
Existing program is open.
Mark
block
Delete
block
2-16
Copy/insert
Use the cursor to select the
required block or the position
where the marking is to start.
Start marking.
Use the cursor to select the
end point of the marking.
Copy the marked text
Place the cursor at the required
insertion point.
Insert copied selection
Delete
Use the cursor to select the
required block or the position
where the marking is to start.
Start marking.
Use the cursor to select the
end point of the marking
Delete marked text
© Siemens AG, 2001. All rights reserved
SINUMERIK 802D Milling ISO Dialect M (ISF) - Edition 09.01
09.01