Performing Initial Setup Operations - Sony STR-DA777ES Primary Operating Instructions Manual

Performing Initial Setup Operations

Once you have hooked up the speakers and turned on the
power, clear the receiver's memory. Then specify the
speaker parameters (size, position, etc.) and perform any
other initial setup operations necessary for your system.
Before turning on the receiver
Make sure that you have:
• Turned MASTER VOLUME to the leftmost position (0).
• Selected the appropriate front speakers (see "@∞
SPEAKERS selector" on page 27).
Clearing the receiver's memory
Before using your receiver for the first time, or when you
want to clear the receiver's memory, do the following.
1/u
1 / u
MULTI CHANNEL DECODING
SPEAKERS
A
OFF B
A+B
FM / AM TUNER PRESET SOUND FIELD PRESET
MEMORY – + – + A.F.D
PHONES
EQ
TUNER
S-VIDEO VIDEO L AUDIO R
CUSTOM
1
Press CUSTOM.
CUSTOMIZE menu appears in the display.
2
Press the cursor buttons (
display "MEMORY CLEAR [NO]".
3
Turn the jog dial to display "MEMORY CLEAR
[YES]" and press ENTER.
"Are you sure? [NO]" is displayed.
4
Turn the jog dial to display "Are you sure? [YES]"
and press ENTER.
The unit automatically turns off, and then turns on
again. All of the followings are reset to the factory
settings or cleared.
• All menu adjustments (speaker settings, equalizer
settings, sound field parameters, etc.).
• The equalizer settings in the equalizer bank.
Jog dial
MASTER VOLUME
AUDIO SPLIT INPUT DIGITAL / ANALOG
SELECTOR
SOUND FIELD
– MODE + 2 CH ANALOG DIRECT EQ BANK 5.1CH INPUT
OPEN/
CLOSE
– +
SUR LEVEL
ENTER
CUSTOM SET UP
ENTER
Cursor buttons
or ) repeatedly to
Performing initial setup operations
Before using your receiver for the first time, use the SET
UP button to adjust the setup parameters so that they
correspond to your system. You can adjust the following
items. For details on how to make adjustments, see the
page in parenthesis.
• Speaker size and placement (pages 18~19).
• Speaker distance (page 20).
17