Performing Initial Setup Operations - Sony STR-DE475 Operating Instructions Manual

Performing Initial Setup Operations

Once you have hooked up the speakers and turned on the
power , clear the r eceiver 's memor y. Then specify the
speaker parameters (size, position, etc.) and perform any
other initial setup operations necessary for your system.
Clearing the receiver's memory
Befor e you use your r eceiver for the first time or when
you want to clear the r eceiver 's memor y, do the following.
This pr ocedur e is not necessar
activates when you turn the power on.
?/1
MULTI CHANNEL DECODING
? / 1
DISPLAY
SET UP
PRESET
DIMMER
– + – +
TUNING TUNING
MEMORY SHIFT FM MODE FM AM
PHONES
1
Turn off the receiver.
2
Hold down ?/1 for four seconds.
The cur rently selected function, then the
demonstration message appears in the display and the
items including the following ar
• All pr eset stations ar e r eset or clear ed.
• All sound field parameters ar
settings.
• All index names (of pr eset stations and pr
sour ces) ar e clear ed.
• All adjustments made with the SET UP button ar
reset to their factor y settings.
• The sound field memorized for each pr
and pr eset stations ar e clear ed.
14 GB
y if the demonstration
VIDEO DVD/LD TV/SAT
MD/TAPE CD TUNER
MULTI CH IN INPUT MODE
MASTER VOLUME
+
NAME
– TREBLE +
–
SOUND CONTROL
LEVEL SURR
MENU
SOUND FIELD
– +
BASS
A.F.D. MODE 2CH MUTING
ENTER
e r eset or clear ed:
e r eset to their factor y
ogram
e
ogram sour ce
Performing initial setup operations
Befor e you use your r eceiver for the first time, use the SET
UP button to adjust settings to cor
You can set the following items. For details on how to
adjust each setting, see the page in par
• Speaker size and placement (page 15).
• Speaker distance (page 17).
• Select the MUL TI CH IN video signal (page 41).
• Whether the display tur ns of f or not when you pr
DIMMER (page 41).
Demonstration Mode
The demonstration will activate the first time you turn on
the power. When the demonstration starts, the following
message appears in the display:
"NOW DEMONSTRATION MODE IF YOU FINISH
DEMONSTRATION PLEASE PRESS POWER KEY
WHILE THIS MESSAGE APPEARS IN THE
DISPLAY THANK YOU"
To cancel the demonstration
Press ?/1 to turn the receiver off while the above message
is being displayed. The next time you turn the receiver on,
the demonstration will not appear.
To view the demonstration
Hold down SET UP and press ?/1 to turn on the power.
Notes
• Running the demonstration will clear the receiver's
memory. For details on what will be cleared, see
"Clearing the receiver's memory" on this page.
• There will be no sound when the demonstration mode is
activated.
• You cannot cancel demonstration if you did not press
?/1 while the above message is being displayed. To
cancel demonstration after the above message appears,
press ?/1 twice to activate the demonstration again.
Then, press ?/1 while the above message is being
displayed.
respond to your system.
entheses.
ess