Setting Up The Remote For On-Screen Control; Using The Remote - Sony STR-D760Z Operating Instructions Manual

Setting Up the Remote for On-Screen Control

Using the Remote

Inserting batteries into the remote (USA
and Canada)
Insert two size AA (R6) batteries with the + and – on
the battery compartment. When using the remote,
point it at the remote sensor g on the receiver.
Inserting batteries into the remote (other
countries)
1
Open the cover on the
bottom of the remote.
2
Insert two size AA (R6) batteries with correct
polarity (+/–), then close the cover.
Notes on the remote
Battery life
Under normal use, the batteries should last for about 6
months. When the remote no longer operates the receiver,
replace both batteries with new ones.
Notes
• Do not leave the remote in an extremely hot or humid
place.
• Do not use a new battery with an old one.
• Do not expose the remote sensor to direct sunlight or
lighting apparatuses. Doing so may cause a malfunction.
• If you don't use the remote for an extended period of time,
remove the batteries to avoid possible damage from
battery leakage and corrosion.
b
Turning on the receiver and bringing up the
on-screen display on your TV (or monitor)
To turn on the receiver, point the remote at the IR
receptor, and then press the direction control button on
the remote once or twice. To bring up the on-screen
display, turn on your TV and set it to the appropriate
video input. If you register the IR code of your TV (see
"Registering a TV (or Monitor)" on page 17), you can
turn on your TV automatically whenever you turn on
the receiver.
IR receptor
For USA and Canada
Direction
control
button
¢
¢
¢
· ∏ π
≠ ±
º ‚
¢
For other countries
Direction
control
button
PUSH
ENTER
(continued)
15