Using The Sleep Timer; Operating A Cd Changer - Sony STR-D760Z Operating Instructions Manual

Additional Operations and Settings

Using the Sleep Timer

You can set the receiver to turn off automatically at a
time you specify.
1
Click SETUP in the main menu to display the
SETUP menu, then click SLEEP TIMER.
FUNCTION
TV SET
IR SET
USER IR
AUTO START
MACRO PLAY
2
Click TIMER repeatedly to select the length of the
sleep timer.
Each time you click TIMER, the menu changes as
follows:
n 2:00:00 n 1:30:00n 1:00:00 n 0:30:00 n OFF
SLEEP TIMER SETTING
HOUR
RETURN
"SLEEP" appears in the upper left corner of the
main menu.
You can also freely specify the time
Click + or – to change the sleep time in 1 minute
increments. You can specify up to 5 hours.
You can check the time remaining before the
receiver turns off
Click FUNCTION, then click SLEEP. The remaining
time appears in the on-screen display.
For USA and Canada
You can also operate the sleep timer by pressing SLEEP
on the remote. Each time you press SLEEP, the time
changes as shown in step 2 above. The display dims
after you specify the time.
To check the time remaining before the receiver turns
off, press SLEEP.
48
SOUND SETUP
FUNC INDEX
CD INDEX
TUNER INDEX
SLEEP TIMER
OSD SETUP
EXIT
MIN SEC
2 : 00 : 00
–
+
SLEEP
EXIT

Operating a CD Changer

Downloading the CD name data in a Sony
CD changer with a CTRL A1 jack
You can download all of the CD name data in a Sony
CD changer that is equipped with a CTRL A1 jack, thus
saving you the trouble of adding names one by one.
Make sure that the CONTROL A1 connection is
complete (see page 8) and the CD changer is registered
as a Sony CONTROL A1 CD in the IR CODE SETTING
menu (see page 19).
1
Click SETUP in the main menu to display the
SETUP menu, then click CD INDEX.
FUNCTION SOUND
TV SET
IR SET
USER IR
2
Click DATA LOAD.
The CD name data is downloaded and after a few
minutes, the downloaded data appears in the CD
INDEX SETTING menu.
CD INDEX SETTING
1
2
3
4
5
6
7
8
9
10
RETURN
Note
If the characters (# $ ; • ä ö ü) have been recorded in the CD
changer, they will appear as blanks in the on-screen display.
SETUP
FUNC INDEX
CD INDEX
TUNER INDEX
>
.
DATA
LOAD
TITLE
GROUP
SELECT
EXIT