Customizing The Receiver Operations - Sony STR-D760Z Operating Instructions Manual

Front Panel Operations
Dynamic range compression ratio
Initial setting is : D.RANGE COMP OFF
Lets you compress the dynamic range of the sound track.
This may be useful when you want to watch movies at low
volumes late at night.
p Speaker level / balance parameters (See page 23
for details)
Rear speaker balance
Initial setting is : REAR L___1___R
Lets you adjust balance between the rear speakers.
Rear speaker level
Initial setting is : REAR 0 dB
Lets you adjust level of the rear speakers.
Center speaker level
Initial setting is : CENTER 0 dB
Lets you adjust the level of the center speaker.
Sub woofer level
Initial setting is : SUB WOOFER 0 dB
Lets you adjust the level of the sub woofer.
Surround (SUR) parameters (STR-DE815G /
STR-D760Z)
Surround effect level
It lets you adjust the "presence" of the current surround
effect.
Delay time (Dolby Surround mode only)
Initial setting is : DELAY 20
It lets you adjust the delay time of the Dolby Pro Logic
surround sound.
See page 39 for details.
Rear speaker level
Initial setting is : REAR SP 0 dB
Lets you adjust level of the rear speakers.
See pages 24 and 25 for details.
Center speaker level
Initial setting is : CENT.SP 0 dB
Lets you adjust the level of the center speaker.
See pages 24 and 25 for details.
(Remote Short-cuts: USA and Canada only)
Customizing the Receiver
Operations
The menu operations allow you to customize various
aspects of the receiver to suit your listening
environment, your speakers, your components, and
your personal preferences.
For the on-screen speaker setup operations, see page 22
(STR-DE1015G) or 24 (STR-DE815G / D760Z).
1
Press SET UP.
"SET UP" appears in the display.
2
Press SET UP repeatedly to display one of the
following menus:
STR-DE1015G
SPEAKER SETUP
FUNCTION HOOKUP
OTHER SETUP
3
Use digital processing control buttons (
select the parameter you want.
4
Use digital processing control buttons ( / ) to
adjust the parameter.
5
Repeat steps 2 and 4 to make all necessary
adjustments.
6
Press SET UP twice to exit the set up mode.
Getting Started
STR-DE815G / STR-D760Z
CENTER MODE
DISPLAY SETUP
FUNCTION HOOKUP
/ ) to
(continued)
57