Bluetooth® Operation; Maintenance; Cleaning The Unit - JVC MX-D719PB Instruction Manual

Bluetooth® Operation
Pairing the unit with a Bluetooth
1. Press the SOURCE button to select the Bluetooth® mode. The display will show "BT", and
then "BT PAIRING".
2. Activate your Bluetooth® device and select the search mode. "MX-D719PB" will appear
on your Bluetooth® device list.
3. Select "MX-D719PB" and enter "0000" for the password if necessary. After the
connection, the display will show "BT" and the unit will make a beep sound.
4. To disconnect the Bluetooth® function,
• Switch to another function on the unit or disable the function from your Bluetooth®
device. The unit will make a beep sound.
• Press and hold Bluetooth button.
The unit will make a beep sound twice and then the display will show "BT PAIRING".
If your Bluetooth
• To pause / resume playback, press
• To skip to a track, press
Turn the MASTER –VOLUME+ dial to increase or decrease the volume.
•
• The operational range between the unit and the device is approximately 10 metres.
• Before connecting a Bluetooth® device to the unit, ensure you know the device's capabilities.
• Compatibility with all Bluetooth® devices is not guaranteed.
• Any obstacle between the device and the unit can reduce operational range.
• Keep this player away from other electronic devices that may cause interference.
• The player will also be disconnected when your device is moved beyond the operational range.

Maintenance

Cleaning the Unit

Ensure the unit is fully unplugged from the mains socket before cleaning.
• To clean the units, wipe the case with a slightly moist, lint-free cloth.
• Do not use any cleaning fluids containing alcohol, ammonia or abrasives.
• Do not spray aerosol at or near the unit.
16
®
device to listen to music:
®
device supports A2DP, play music via your device.
or
.
.