Advertisement
Bluetooth Operation
1. Press the BT button on the unit or the remote control to switch to the BLUETOOTH
CONNECT mode.
2. Open the Bluetooth function on your external device (like a smartphone). Search
for 'XS-N4211' and connect to it.
3. Once connected, you can hear a small sound from the speaker.
4. You can use the
or
key on the unit or the remote control to control the tracks
of the external device.
5.Press and hold the
/
button on the unit to disconnect the bluetooth.
Note: This speaker does not require a password.
FM Radio Operating Instructions
Note: When using FM mode, plug the Aux cable provided into the AUX port (as an FM
antenna). Leave the other end free.
1. Press Mode Button on the unit or remote control repeatedly until FM mode is selected.
(Display shows FM) to switch to FM Radio mode.
2. Press SEARCH button on the unit or the remote control to search and save the channels
automatically.
3. Press SEARCH button again to stop the search.
4.Press
or
to select previous/next channel.
5
Troubleshooting
Problem
1. Ensure that the AC power plug of the speaker is
connected properly.
No Power
2. Ensure that there is power at the AC outlet.
1. Inspect the function and adjust the volume.
No sound or poor sound
2.Check if speaker is muted.
Check if the effective connection distance is exceeded or
Intermittent music in
Bluetooth mode
whether there are obstacles between the speaker and BT device.
1. Ensure that the right source is selected.
2. Use the remote control within its range without any objects
between the remote control and the unit.
Remote control
3. Try replacing the batteries ensuring correct polarities as
does not work
marked.
4. Aim the remote control towards the receiver on the display
screen of the unit.
1. The formats of these files are not supported.Only mp3 files
USB file failure to play
can be played.
2. The USB device is incompatible with the speaker or the
USB is damaged.
1. If other bluetooth devices are connected to your phone, try
disconnecting these first, then search and connect again.
Bluetooth can not search
2. Turn off the speaker and turn on again, then switch to
or connect
bluetooth mode.
3. Turn off and turn on bluetooth on your external device.
1. Plug the Aux cable provided into the AUX port (as an FM
antenna). Leave the other end free.
FM channels not
2. Try different channels to see if it is a problem with one or two
working properly
channels.
3. Try moving to a different position or a different room.
Troubleshooting method
6
Advertisement
