Using The Usb; Line In (Aux In) Operation - JVC MX-D719PB Instruction Manual

Using the USB

By connecting a USB mass storage device
(including USB flash memory or USB flash
players) to this unit, you can enjoy the device's
stored music through the unit.
1. Press SOURCE button repeatedly to select
the USB source. The display will show
"USB", and then "LOAD".
• If there is no USB device connected,
the display will show "NO USB".
• If there is no MP3 file in the USB
device, the display will show "NO MUSIC".
2. The display will show the number of ALBUM and FILE stored in the USB device, and
then start playback.
3. Press and hold
4. Press and hold
ALBUM / REPEAT ALL / REPEAT OFF.
• The player supports the USB music file format of MP3 only.
• The unit can support USB devices with up to 32 GB of memory.
• You may need to press
• The unit may not be compatible with all USB devices, this is not an indication of a problem with the
unit.

LINE IN (AUX IN) Operation

1. While in ON mode, press the SOURCE button to select the LINE IN mode. The words
"LINE" will be shown on the display.
2. Operate your audio device directly for playback features.
3. Turn the MASTER –VOLUME+ dial to adjust the volume to your desired level.
buttons are invalid in LINE IN mode.
The and
or button to select next/previous album, and play the first track.
button to select different REPEAT mode: REPEAT ONE / REPEAT
button to start playback after inserting the USB device.
BOOSTER
TUNE
STEREO
TUNE CHAIN
PAIR
15