Quasar HQ-2243TH,LWC081 Service Manual page 5

• VENTILATION
The ventilation lever must be in the CLOSE position in order to maintain the best cooling conditions.
When fresh air is necessary in the room, set the ventilation lever to the OPEN position.
The damper is opened and room air is drawn out.
CLOSE VENT
NOTE: Before using the ventilation feature, and prior to installing the front grille, pull down part
• AIR DIRECTION
The direction of air can be controlled wherever you want to cool by adjusting the horizontal louver and the vertical louver.
• HOW TO SECURE THE DRAIN PIPE
In humid weather, excess water may cause the BASE PAN to overflow. To drain
the water, remove the DRAIN CAP and secure the DRAIN PIPE to the rear hole
of the BASE PAN. Press the drain pipe into the hole by pushing down and away
from the fins to avoid injury.
OPEN
• VERTICAL AIR-DIRECTION CONTROL
The vertical air direction is adjusted by rotating the horizontal louver
forward or backward manually.
• HORIZONTAL AIR-DIRECTION CONTROL
The horizontal air direction is adjusted by rotating the
vertical louver right or left manually.
—5—
Part A
Drain pipe
Drain cap
Part B
until level with part .