Entering Text - Sony NAS-SV20DI User Manual

Entering text

Entering text may be required during some setup
operations such as network settings. You can enter
text using the remote control.
A Numeric/text buttons
Press the button with the desired letter (ABC,
DEF, etc.). Press repeatedly until the desired
letter appears.
B CLEAR button
Press this button to erase a letter that was just
entered.
C M/m/</,/ENTER buttons
• M/m/</, buttons
Use these buttons to move the cursor.
• ENTER button
Use this button to enter a text string.
D
button
Press this button so that the order of the
characters which are assigned to a button
appear in reverse. For example, pressing the
no. 2 button repeatedly normally displays "A,"
"B," "C," and "2," however, pressing this
button changes the order to "2," "C," "B," and
"A."
E CHARACTER button
This button selects the type of characters and
numbers. Each time you press the button, the
type of characters and numbers changes in the
sequence "abc" (lowercase letters of the
alphabet and numbers) t "ABC" (uppercase
letters of the alphabet and numbers) t "123"
(numbers only).
If you want to enter punctuation marks (e.g., !,
?, etc.) and other symbols (e.g., #, %, etc.),
select "abc" or "ABC."
Example of a character input
display
The display shown below is an example of the
character input display that appears when you are
searching for an item using a keyword.
Cursor
Current location of the cursor/
number of characters you have
entered
How to enter text
1
Press CHARACTER repeatedly to
select the desired type ("abc,"
"ABC," or "123").
2
Press the corresponding numeric/
text button to enter the desired
character, then press , to move
the cursor to the next input position.
Repeat this step to enter the text string.
3
Press ENTER to confirm and save
the text string.
Other operations
To Do the following
Restore the previous Press BACK.
condition
Move the cursor Press </, to move the
cursor left or right.
Press M/m so that the cursor
moves to the beginning or
to the end of the text string.
To select the type of characters
and numbers
Press CHARACTER to select "abc," "ABC," or
"123."
A symbol that indicates the
end of the text string
currently being entered
Type of
characters and
numbers
19
GB