Sony SNC-M3 Quick Start Manual page 8

Setting for Wireless Network
(SNC-M1W/M3W only)
To use the camera in a wireless network via an access
point, set as follows.
Use the network cable for connection when you assign a
new IP address to the SNC-M1W/M3W wireless network
camera.
1
Display the welcome page of the
camera following the procedure of
"Monitor the Image of the Camera" on
page 7.
2
Click "Setting."
3
Type the user name and password for
the administrator, then click "OK."
The default settings of both items are "admin."
Type the user name.
The "Administrator" menu is displayed.
Sony Corporation
Click.
Type the password.
Click.
4
Click "Network."
The "Network setting" menu appears.
5
Click the "Wireless network" tab.
6
Set the items for the wireless network.
a
Select "Infrastructure" on "Type."
b
Enter the "SSID" to match the setting on the
access point.
c
Enter the "WEP key data" to match the
settings on the access point.
d
Click "OK."
7
Turn off the power of the camera.
8
Remove the network cable from the
camera.
9
Turn on the power of the camera
without connecting the network cable.
The Wireless setting is now enabled.
Click.
1
Infrastructure
2
SSID
3
WEP key
data
4
OK