Sony SNC-M3 Quick Start Manual page 6

To assign a static IP address
Click on "Use the following IP address" and enter
the IP address, subnet mask and default gateway.
4
Click on "Obtain DNS server address
automatically."
By selecting "Obtain DNS server address
automatically," the DNS server addresses are
automatically assigned.
Select this.
DNS server addresses are displayed.
5
Click on "80" on "HTTP port No."
Select this.
6
Type "admin" in both the
"Administrator name" and
"Administrator password" boxes.
The default settings of both items are "admin."
You can change the administrator name and
password later using the "User setting" menu.
Type "admin."
7
Record the set IP address in the
following space.
You need to enter the IP address when you set
the router*.
IP address
* To view the camera image via Internet, you need to set
port forwarding on the router. See "Set Port Forwarding
on the Router".
6
Set Port Forwarding on the Router
8
7
To view the camera image via Internet, you need to set
port forwarding on the router. Skip this setting when you
do not use the router.
1
2
Type "admin."
Click "OK."
"Setting OK" is displayed.
The network setting of the camera is completed.
Note
To exit the IP Setup Program, click
corner.
Set Port Forwarding on the Router
Perform the port forwarding setting on
the router.
For details, refer to the operation manual supplied
with the router.
Check the global IP address for WAN
on the router and record it in the
following space.
You need to enter the global IP address when you
access the camera via Internet.
Global IP address
Note
The name of the function "port forwarding" may be different
depending on the router.
on the upper right
Click.