Sony SNC-M3 Quick Start Manual page 7

8
Monitor the Image of the Camera
You can monitor the image of the camera using Internet
Explorer as the Web browser.
Note
This section uses illustrations of the Welcome page of
Network Camera SNC-M1W.
Accessing from Internet Explorer
1
Start Internet Explorer.
2
Type the IP address in the URL box of
Internet Explorer.
To view the image via LAN:
Enter the IP address recorded in step 7 on page
6.
To view the image via Internet:
Enter the global IP address of the router recorded
in step 2 of "Set Port Forwarding on the Router"
on page 6.
Type the IP address.
The welcome page of the camera is displayed.
Note
For checking your network configuration, see "System
Configuration" on page 1.
3
Click "Enter."
The image shot by the camera is displayed in the
main viewer.
When you access the main viewer of the camera for
the first time
When you click "Enter" on the welcome page, "Security
warning" is displayed.
When you click "Yes" to install the ActiveX control and the
main viewer is displayed.
Click.
Note
If the welcome page is not displayed correctly, check the
security level setting of the Internet Explorer. For details, refer
to the User's Guide stored in the supplied CD-ROM.
Monitor the Image of the Camera
Click.
7