System Log Tab; Access Log Tab - Sony IPELA SNC-P1 User Manual

Notes
• With Restore setting, some items in the Network
setting menu (page 38) cannot be restored.
• The following item cannot be stored or restored with
Backup setting data or Restore setting.
– a homepage created using Custom Homepage
Installer
Delete user setting URL
By pressing Delete, you can delete the home page
recorded on the flash memory of the camera with
Custom Homepage Installer (page 72).
Firmware upgrade
Use this when upgrading the camera software. Click
Browse and specify the file for upgrading, then click
OK. The massage "Upgrade firmware? Are you sure?"
is displayed. Click OK and upgrading starts. After
completion, the camera starts again.
Notes
• Use only the upgrade file special to this camera. If
not, a problem may occur.
• Do not turn off the camera until the upgrading is
completed.

System log Tab

System log
The data of the software activity of the camera are
recorded in this log. It includes data that are useful when
a problem occurs.
Click Reload to reload the latest data.

Access log tab

Access log
The access record of the camera is displayed.
Click Reload to reload to the latest data.
Configuring the System — System setting menu
33