Central Pneumatic 42332 Assembly And Operating Instructions Manual page 6

shown in the diagram below. Hoses, couplers, oilers, regulators, and filters are
all available at Harbor Freight Tools. NOTE: For smoother operation, and to
extend the lifespan of the tool, put 3-5 drops of pneumatic Tool Oil (68) in the
attached Air Plug (66) before each use.
QUICK
CONNECTOR
STAPLER
TESTING THE CONTACT SAFETY TRIP MECHANISM
WARNING: Even though the Stapler should be empty during this
procedure, ALWAYS point the Stapler at a piece of scrap wood when test
ing.
1. Make sure the tool is disconnected from its air supply.
2. Completely empty the Magazine B (49) of Staples (69).
3. The Stapler should not fire if the Drive Guide (48) is not depressed against the
workpiece.
4. Make sure the Trigger (35) and Drive Guide (48) move freely, without sticking.
AIR PLUG
(66)
SKU 42332 For technical questions, please call 1-800-444-3353
AIR
QUICK
HOSE
CONNECTOR
QUICK
QUICK
COUPLER
COUPLER
CONNECTION TO AIR SUPPLY
TRIGGER
(35)
MAGAZINE B (49)
OILER
FILTER
AIR
COMPRESSOR
REGULATOR
DRIVE GUIDE (48)
PAGE 6