Inspection, Maintenance, And Cleaning; Please Read The Following Carefully - Central Pneumatic 42332 Assembly And Operating Instructions Manual

INSPECTION, MAINTENANCE, AND CLEANING

1. Inspect the Stapler frequently and lubricate periodically with pneumatic Tool Oil
(68). Then, wipe dry. Do not use detergent oil or additives as these lubricants
will cause accelerated wear to the internal seals.
2. Inspect the air supply Screen (65) before each use and clean or replace as
necessary. Dirt and water in the air supply Screen are major causes of pneumatic
tool wear. Use an oiler/filter in the compressed air system for better performance
and longer tool life. The filter must have adequate flow capacity for the specific
application.
3. Clean the external parts of the Stapler with a clean cloth and mild detergent or
non-flammable solvent. Then, dry.
4. Store the tool in a clean, dry, safe location out of reach of children.
5. CAUTION: All maintenance, service, or repairs not listed in this manual
are nly to be attempted by a qualified service technician.

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN
THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY
REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO REPLACE
ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES
THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED
TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISKS AND LIABILITY ARISING OUT OF
HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF
HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
SKU 42332 For technical questions, please call 1-800-444-3353 PAGE 10