Page 1
COMPOSITE AIR HAMMER WITH FOUR CHISELS 98672 SET UP AND OPERATING INSTRUCTIONS ® Distributed exclusively by Harbor Freight Tools 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious injury.
Keep bystanders, children, and minor or moderate injury. visitors away while operating the SKU 98672 For technical questions, please call 1-800-444-3353. Page 2...
Do not force the tool. Use the shoes and a hard hat must be used for the applicable correct tool for the application. The correct tool will do the job better and SKU 98672 For technical questions, please call 1-800-444-3353. Page 3...
Use only accessories that are identified by the manufacturer for the specific tool model. Use of an accessory not intended for use with the specific tool model, increases the risk of injury to persons. SKU 98672 For technical questions, please call 1-800-444-3353. Page 4...
A loose accessory may detach or all possible conditions and situations break during operation. that may occur. It must be under- stood by the operator that common sense and caution are factors which SKU 98672 For technical questions, please call 1-800-444-3353. Page 5...
Page 6
Do not smoke during use. Nico- tine reduces the blood supply to the hands and fingers, increasing the risk of vibration-related injury. SKU 98672 For technical questions, please call 1-800-444-3353. Page 6...
Remove this plug before set up. Attach an air hose to the compres- sor’s air outlet. Connect the air hose to the air inlet of the tool. Other com- SKU 98672 For technical questions, please call 1-800-444-3353. Page 7...
Page 8
Adjust the pressure gradually, while checking the air output gauge to set the right pressure range. Inspect the air connections for leaks. Repair any leaks found. SKU 98672 For technical questions, please call 1-800-444-3353. Page 8...
Figure C below. off position before performing This will keep the chisel from falling any inspection, maintenance, out. or cleaning procedures. Chisel Figure B Figure C SKU 98672 For technical questions, please call 1-800-444-3353. Page 9...
Page 10
Air Inlet (10) at the base on the with clean, dry cloth, and apply a thin Housing (1). coat of tool oil. Then store the tool indoors out of children’s reach. SKU 98672 For technical questions, please call 1-800-444-3353. Page 10...
Lubricate the air inlet using only pneumatic tool oil. Lubricate the internal mechanism using only white lithium grease. Other lubricants may damage the mechanism and may be highly flammable, causing an explosion. SKU 98672 For technical questions, please call 1-800-444-3353. Page 11...
BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. SKU 98672 For technical questions, please call 1-800-444-3353. Page 12...
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not avail- able individually as replacement parts. SKU 98672 For technical questions, please call 1-800-444-3353. Page 14...