Operation - Panasonic Alert annunciation unit 1736 Technical Description

12

Operation

The LED "Operation" (L6) indicates whether the "Alert Annunciation" function
is enabled or disabled
When the "Alert Annunciation" function is enabled, the LED "L3" (Fire brigade
alerted) indicates
Off = AA alarm and On = no AA alarm / Output "Fire brigade tx" activated.
The LED "L4" (Acknowledged) is indicating if the AA alarm has been
acknowledged.
The following page / figure show an operation summary for the Swedish
version of the Alert Annunciation unit 1735. It is applicable to the English
version 1736.
See also chapter "SW mode & Address setting, page 13.
AA alarm acknowledged in any Alert Annunciation unit will be indicated in all
"Alert annunciation units".
AA alarm reset in any Alert annunciation unit (or in the C.I.E.) will also be
"reset" in all other Alert Annunciation units.
NOTE! The Alert Annunciation unit in the figure is only schematic, i.e. the
positions of the different LEDs, push buttons, etc. are not according to Figure
2 on page 10
17
The AA function is normally enabled (during daytime) / disabled (during night-time)
via a time channel.
17
.
whether the alarm
25
Technical Description
AAU 1736 – Rev 1
is AA alarm or not i.e.