Table 1 Of Led Indicators - Panasonic Alert annunciation unit 1736 Technical Description

Table 1 of LED Indicators:

LED indicator Colour
L1 Fire 2 x Red
Alarms
L2 2 x Red
queued
L3 Extinguishing Red
L4 Acknowledge Yellow
Fire brigade
L5 Red
alerted
L6 Operation Green
NOTE! Regarding "L2", see also chapter "SW mode & Address setting, page
13.
4
Indicating same as indicated in the C.I.E. where the AA unit is connected, i.e. by
activated output(s) of the corresponding type or an activated input.
Indicating
Blinking + LED AA alarm (Acknowledge time
"L6" turned on + starts)
Buzzer
(intermittent)
Blinking + LED Fire alarm (i.e. not an AA
"L3" turned on (no alarm).
buzzer).
Steady (no buzzer) AA alarm(s) is/are
acknowledged.
More than one alarm. Use push
Blinking button "P1" (Alarms queued) to
scroll.
Outputs for Extinguishing are
Steady
activated
All AA alarms have been
acknowledged by the push
Steady button "P2" (Acknowledge) and
new AA alarms will be
automatically acknowledged.
Output(s) for "Fire brigade tx"
Steady
are activated.4
Steady The AA function is enabled.
Off The AA function is not enabled.
11
Technical Description
AAU 1736 – Rev 1