Table of Contents
Advertisement
6
TRANSPORT AND INSTALLATION
6.1 Description of the package and storage
MR991 and its accessories are supplied in one single
package on a pallet.
Store in a dry place, protected from atmospheric agents
and direct sunlight.
Upon delivery, check that the package is not damaged,
including the equipment and the accessories inside the
package.
In case of damage immediately contact the manufacturer
or the distributor.
6.2 Removal of package and content check
1) Remove the protective strips which hold the first package
together, being careful not to damage the outside wrapping.
2) Remove the tape on the upper part of the package.
3) Remove the whole wrapping by sliding it upwards.
4) Check that all three parts (A, B, C) are inside the package, and
that they are not damaged.
5) Take out packages A and B.
6) Remove protecting film C without using any sharp objects.
7) Unscrew the two blocking knobs D at the base of MR991.
8) Check packages A and B, which must contain:
E
1 transparent handpiece holder
4 fixing screws
F
4 handpieces
1 power cable
G
3 handpiece support battens
H
1 tab removal tool
8 handpiece tabs
2 switch keys
L
3 filters
M
10 personal body stockings
N
1 USB stick
The packaging materials
must be disposed of
separately, in compliance
with the laws in force.
D
E
H
14
A
C
B
D
G
F
L
M
N
Advertisement
Table of Contents
