Setup Menu - Sony Bravia VPL-VW200 Operating Instructions Manual

Setup Menu

The Setup menu is used to change the factory preset settings, etc.
Status
Language
Cooling Setting
Standby Mode
Power Saving
48
Sets whether or not the on-screen display is displayed.
Set to "Off" to turn off the on-screen displays except for the menus,
message when turning off the power, and warning messages.
Selects the language used in the menu and on-screen displays.
Available languages are: English, Dutch, French, Italian, German,
Spanish, Portuguese, Russian, Swedish, Norwegian, Japanese,
Chinese (Simplified Chinese), Chinese (Traditional Chinese),
Korean, Thai and Arabic.
Use this item when using the projector at high altitudes.
High: Use this setting when using the projector at an altitude of
1,500 m or higher.
Standard: Use this setting when using the projector at normal
altitudes.
Note
When this item is set to "High", the fan noise becomes slightly
louder since the number of fan rotation increases.
Sets to lower the power consumption in standby.
Standard1: Sets power consumption to normal.
Standard2: Sets the network function ineffective and reduces power
consumption lower than "Standard1".
Low: Reduces power consumption lower than "Standard2".
Note
When this item is set to "Low", the HDMI Control function and the
network function will not operate in standby.
Sets the power saving mode.
When set to "On", the projector goes into power saving mode if no
signal is input for 10 minutes. At that time, the ON/STANDBY
indicator lights in orange, then the screen becomes dark. In power
saving mode, the power saving mode is cancelled if a signal is input
or any button is pressed. If you do not want to set the projector to
power saving mode, select "Off".