Sony Bravia VPL-VW200 Operating Instructions Manual page 19

To connect to a DVD player/recorder or Blu-ray Disc player
equipped with HDMI output
You can enjoy better picture quality by connecting a DVD player/recorder or Blu-ray Disc
player equipped with HDMI output to the HDMI input of the projector. Moreover, if you
have an HDMI control compatible equipment, you can operate the projector
synchronizing with the HDMI control compatible equipment. For details, see the Function
menu (1 page 50) and "About the HDMI Control" (1 page 59).
Right side of the projector
: Video signal flow
Notes
• When connecting equipment to the HDMI input of the projector, be sure to use
equipment that have acquired the HDMI logo.
• When connecting an HDMI cable to the projector, make sure the
part of the HDMI input of the projector and the
set at the same position.
• If the picture from equipment connected to the projector with an HDMI cable is not
clear, check the settings of the connected equipment.
.............................................................................................................................................................
HDMI Control is an HDMI standard mutual control function which uses the HDMI CEC (Consumer
Electronics Control) specification.
This projector supports DeepColor, x.v.Color, LipSync, and PC Display input of HDMI standards.
It also supports HDCP.
HDMI cable (not supplied)
When using an optional HDMI cable, be sure to use
a cable that has acquired the HDMI logo.
V mark on the connector of the cable is
AV amplifier
Speakers
DVD player/recorder or
Blu-ray Disc player, etc.,
with the HDMI output
to HDMI output
V mark on the upper
19