Remote Commander - Sony VPL-CX80 Operating Instructions Manual

volume of the speakers can be
controlled by the VOLUME+/– keys
on the Remote Commander.
When INPUT A or B is selected, the
sound input to the AUDIO connector
which is common for INPUT A/B is
output.
When VIDEO or S VIDEO is selected,
the sound input to the AUDIO input
connector of VIDEO IN is output.

Remote Commander

The keys that have the same names as those
on the control panel function identically.
COMMAND
OFF ON
w;
PJ NETWORK
ql
qk
LENS
VOLUME
qj
APA
qh
MENU/
TAB
qg
qf
qd
qs
D ZOOM
1
FUNCTION
RM-PJM15
PROJECTOR
RM-PJM17
I / 1 (on/standby) key
1
2 MUTING keys
Cut off the picture and sound.
14
GB
Location and Function of Controls
wa
1
PIC
2
MUTING
AUDIO INPUT
3
TILT/KEYSTONE
4
5
6
AIR SHOT
FREEZE
7
8
a
8
b
R
8
ENTER
c
CLICK
RESET/
ESCAPE
9
3
q;
2
qa
• PIC: Cuts off the picture. Press again
to restore the picture.
• AUDIO: Press to temporarily cut off
the audio output from the speaker, and
the output on the AUDIO jack in the
OUTPUT section. Press again or press
VOLUME + key to restore the sound.
3 INPUT key
4 TILT/KEYSTONE (Vertical/
horizontal trapezoidal distortion
correction) key
Adjusts the tilt of the projector, or the
horizonal/vertical trapezoidal distortion
of the image manually. Each time you
press this key, the Tilt menu, the V
Keystone menus and Side Shot menu are
displayed. Use the arrow keys (M/m/
</,) for adjustment.
(Memory Stick) key
5
This key does not work in this unit.
6 FREEZE key
Freezes the picture projected. To cancel
the frozen picture, press the key again.
7 AIR SHOT key
This key does not work in this unit.
8 Keys that emulate a mouse
These keys function as mouse buttons of
a computer only when the projector is
connected to the computer using the
USB cable.
For details, see "Controlling the
Computer Using the Supplied Remote
Commander (When Using the USB
Cable)" on page 25.
9 ENTER key
q; FUNCTION 1, 2, 3 keys
These keys do not work in this unit.
qa Strap holder
For attaching a strap.
qs RESET/ESCAPE key
Functions as a RESET key.
Resets the value of an item to its factory
preset value or returns the enlarged