The Information Menu; Direct Power On; Lens Control; High Altitude Mode - Sony VPL-CX80 Operating Instructions Manual

High: Illuminates the projected image
brightly.
Standard: Reduces fan noise and power
consumption. The brightness of the
projected image will be lower compared
with the "High" setting.

Direct Power On

Set to "On" if you are using a circuit breaker
to turn the power on/off the entire system.
You can turn off the power just by
unplugging the power cord without pressing
the I/1 key.

Lens Control

When set to "Off," the LENS (FOCUS,
ZOOM) key on the Remote Commander,
and the FOCUS and ZOOM keys on the
projector do not function.

High Altitude Mode

The factory setting is "Off."
Set to "On" when the projector is used at an
altitude of 1,500 m or higher.
Security Lock
Turns on the projector's security lock
function.
Off: Turns off the security lock function.
On: Turns on the security lock function,
which locks the projector once a
password has been set.
For details, see "Security Lock" on page 24.
36
GB

The INFORMATION Menu

The INFORMATION
Menu
The INFORMATION menu displays the
horizontal and vertical frequencies of the
input signal and the used time of the lamp.
I N F O R M AT I O N
f H : 4 8 . 4 7 k H z
fV: 60.00Hz
No.23
1 0 2 4 x 7 6 8
L a m p T i m e r : 0 H
Menu Items
fH
Displays the horizontal frequency of the
input signal.
The displayed value is approximate.
fV
Displays the vertical frequency of the input
signal.
The displayed value is approximate.

Lamp Timer

Indicates how long the lamp has been turned
on.
Note
These only display on the screen. You cannot
alter the display.
I n p u t A
Memory
number of
an input
signal
Signal
type