Sony VPL-CX125 Network Operating Instructions page 21

Time Zone
Select the region in which you are using the
projector.
Date/Time
Set the date and time (MM, DD, YY,
HH:MM).
Time Server
Enter the address of the time server when the
time is set by a timer server.
Setting passwords for
"Administrator" and "User"
You can set passwords for each
"Administrator" and "User."
The name of the "Administrator" account is
preset to "root" at the factory. It cannot be
changed.
Notes
• When you change the password, input a new
password after deleting the Password
(*****) that was set.
• If you forget your password, consult with
qualified Sony personnel.
Settings for the Mail Report
function
You can do the following with the Mail
Report function.
• Periodically report the installation status
of the projector, owner information, etc.
You can specify the transmission days and
times of e-mail messages (Regular report).
• Immediately report if any error occurs
with the projector (Error Report).
• Send warning e-mail messages when a
preset time for use of the projector lamp
has been reached (Lamp Reminder).
• Send warning e-mail messages when a
preset time for maintenance of the
projector has been reached (Maintenance
Reminder).
x Report Timing field
Regular Report
A report on the present status of the
projector, installation status, etc. of the
projector is periodically sent by e-mail.
Set the timing for sending the e-mail
messages as follows:
AT: Specify the time when e-mail is to be
sent. Select the hour from the drop-down
list.
Every Week on Days: Select this check box
to send e-mail on the selected days every
week.
Setting/Operating via Web
21