Setting/Operating Via Web; Accessing From The Computer - Sony VPL-CX125 Network Operating Instructions

[Projector Setting] tab
The IP address of the projector must be
specified when the projector has the
different network segment (subnet) from the
computer.
Up to 100 projectors can be entered.
[Others] tab
The [Others] tab provides other settings.
To use the Simple Mode in this version of
Projector Station for Air Shot Version 2,
check the check box of [Enable Air Shot V2
Version 1.x transparent mode]. [Use USB
Wireless LAN Module as Simple Mode] of
the [Basic Setting] tab and the [Simple Mode
Setting] tab can be used.
Do not check when only the VPL-CX155/
CX125/CW125 series model is used.
18

Setting/Operating via Web

Setting/Operating
via Web
You can check the information of the
projector from the computer or operate the
projector on the computer. Check the
connection and turn on the equipment.

Accessing from the Computer

You can access the Web page of the projector
by either of the following two ways.
Right-click the projector button in the main
window of Projector Station for Air Shot
Version 2 and click the displayed [Show
Projector Web].
Start a browser of the computer (Internet
Explorer 5.0 or higher) and enter the address
"http://xxx.xxx.xxx.xxx (IP address of the
projector)".
Note
If the browser of your computer is set to
"Access the Internet using a proxy server,"
enter the IP address of the projector in the box
"Access the Internet without using a proxy
server" when you have access to the projector
from your computer.