Sony VPL-CX125 Network Operating Instructions page 10

x Displaying the mode status
When you select [Status] from the action menu, the status of the mode being used is displayed.
Items
Internet Protocol(IP)
PC Registration List
Close
x Changing the settings
When you select [Setup] from the action menu, the [Network Setting] window of the selected
mode is displayed, where [Internet Protocol(IP)] and [PC Registration List] settings can be
changed. Select the desired item and press the ENTER (or right) key to activate its setting items.
To input the desired value for the items, press the ENTER (or right) key. You can return to the
setting menu with the ENTER (or left) key. Click [OK] to save the settings and return to the
initial display of the setting menu. If you select [Cancel], the settings will not be saved and the
initial display of the setting menu appears.
Items
Internet Protocol(IP)
IP Address Setting
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
PC Registration List
10
Preparation
Display contents
Displays [IP Address Setting (Manual/Auto)], [IP Address],
[Subnet Mask], [Default Gateway], [Primary DNS], [Secondary
DNS], [DHCP Server], and [Lease Obtained]/[Lease Expires].
[Lease Obtained]/[Lease Expires] means the valid period of the IP
address assigned from the [DHCP Server] automatically.
Displays the address of the entered PC.
Closes the [Network Status] window.
Functions
Specify the [Internet Protocol(IP)] settings: [IP Address
Setting (Manual/Auto)], [IP Address], [Subnet Mask],
[Default Gateway], [Primary DNS], [Secondary DNS].
Select [Auto(DHCP)] or [Manual].When the [Manual] is
selected, set [IP Address], [Subnet Mask] and [Default
Gateway].
Set the IP address for the projector.
(1.0.0.0~223.255.255.255)
Set the subnet mask for the projector.
(128.0.0.0~255.255.255.254)
Set the default gateway for the projector.
(1.0.0.0 ~223.255.255.255)
Set the primary DNS server. (1.0.0.0~223.255.255.255)
Set the secondary DNS server. (1.0.0.0~223.255.255.255)
Enter the IP address or the network address/broadcast IP
address in the IP address box to connect a computer that has
a different network segment (subnet) from the projector.
When the network address/broadcast IP address is entered,
select the subnet mask from the list. Up to 10 IP and
network/broadcast IP address can be entered.