Sony KP-41T35 Operating Instructions Manual page 11

Connecting two VCRs for tape editing using MONITOR OUT
You can record input images displayed on the screen.
This type of connection should be used only when you
connect from the line input of one VCR, and from the
line output of a second VCR.
VCR (for playback)
OUT
AUDIO VIDEO
LINE
IN
OUT
Video and audio
outputs
VMC-810S/820S
(not supplied)
Notes
• Do not change the input signal while editing through
MONITOR OUT, or the output signal will also change.
• You can use the S video jack to connect a VCR for playback
and the composite video connector to connect a VCR for
recording.
• For models KP-41T35/46C36, you can connect the audio and
video outputs of the VCR to VIDEO 3 IN jacks instead of the
VIDEO 2 IN jacks.
(Rear of projection TV)
IN
VIDEO 1 VIDEO 2
MONITOR AUDIO
S VIDEO
VIDEO
L
CONTROL S
(MONO)
OUT
AUDIO
R
AUDIO-R (red)
AUDIO-L (white)
VIDEO (yellow)
AUX
TO
CONVERTER
OUT
( VAR/FIX )
VHF/UHF
AUDIO VIDEO
VMC-810S/820S
(not supplied)
• When connecting a single VCR to the projection TV, do not
connect the MONITOR OUT to the VCR's line input, while at
the same time connecting from the projection TV's VIDEO IN
connectors to the VCR's line output, as shown below.
(Rear of projection TV)
VIDEO IN
VCR
DO NOT CONNECT IN THIS WAY.
VCR (for recording)
OUT
LINE
IN
IN
Video and audio
inputs
MONITOR
OUT
LINE
IN OUT
11 -EN
Getting Started
EN