Camcorder - Sony Qualia 006 Owner's Manual

Setting Up the SXRD Projection TV

Camcorder

Front of SXRD projection TV
i.LINK S400
TS/DV/MICROMV/HDV
S VIDEO
50
Disconnect all power sources before making any connections.
For easy connection of the camcorder, the SXRD projection TV has front
audio and video inputs (shown below). However, if you prefer, you can also
connect the camcorder to the SXRD projection TV's rear AUDIO and S
VIDEO IN jacks.
Using A/V and S VIDEO cables, connect the camcorder's audio and
S VIDEO OUT jacks to the SXRD projection TV's AUDIO and S VIDEO
IN jacks.
✍
If your camcorder is equipped with an i.LINK jack, you can connect it
using i.LINK instead of the A/V inputs. See "Using i.LINK" on page 99.
✍
If you have a mono camcorder, connect its left audio output to the SXRD
projection TV's AUDIO L (MONO) jack.
✍
If your camcorder is not equipped with S VIDEO, use a VIDEO cable
(yellow) instead of the S VIDEO cable.
VIDEO 2 INPUT
VIDEO L (MONO) - AUDIO -R
AUDIO-R
AUDIO-L
VIDEO
S VIDEO
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.
To A/V output
A/V cable
S VIDEO cable

Camcorder

To S VIDEO
output