Setting Up the SXRD Projection TV
Cable and Antenna
36
For best results, use this connection if you:
❑
Have a cable and an antenna.
(This is convenient if you are using a separate rooftop antenna to receive
additional channels that are not provided by your cable TV company.)
❑
Do not have a cable box or VCR. (If you have a cable box, see pages 37
and 38. If you have a VCR, see pages 41 and 42.)
Antenna and CATV cable
Cable Type
Connect As Shown
Cable TV
(CATV) and
Antenna cable
Antenna
Notes on Using This Connection
To Do This ...
Switch the SXRD projection
TV's input between the cable
and antenna
✍
For optimum picture quality, a 75-ohm coaxial cable antenna connection
is highly recommended. Radio waves and other interference can easily
affect a 300-ohm twin lead cable, resulting in signal deterioration. If you
use a 300-ohm twin lead cable, keep it as far away as possible from the
SXRD projection TV.
✍
Do not use an indoor antenna, which is especially susceptible to radio
noise.
Do This ...
Press
ANT
to switch back and forth between the
SXRD projection TV's VHF/UHF and CABLE
inputs.
CATV cable