■
After completing your work, switch the electric
tool off and do not pull the saw blade
of the cut until the tool has come to a standstill .
This avoids kickbacks, and allows you to put
the tool down safely .
■
Only use undamaged saw blades that are in
perfect working order . Bent and blunt saw blades
can break or cause a kickback .
■
Do not try and slow the saw blade
after switching off by applying lateral pressure .
The saw blade
can be damaged, break or
cause a kickback .
■
Immobilise the workpiece securely . Use clamps/
vices to hold the workpiece firmly . This is much
safer than simply holding it in your hand .
■
Always run the power cord away from the
appliance to the rear .
■
Never work on moistened materials or wet
surfaces .
■
Hazards caused by dust! When working for
extended periods on wood and, in particular,
materials that produce dusts that are hazardous
to health, connect the appliance to an appropri-
ate dust extraction appliance .
■
Wear a dust mask .
■
Ensure there is sufficient ventilation .
WARNING! Protect yourself from
laser radiation!
LASER
P max.: < 1 mW • λ: 650 nm • EN 60825-1:2014
■
Never look directly into the laser beam or into
the laser discharge opening
emerges .
PSTK 800 B2
out
down
2
from which it
WARNING!
►
Looking at a laser beam through optical
instruments (e .g . magnifying glasses etc .)
can cause eye injuries .
►
Caution! If operating and adjustment equip-
ment is used or procedures other than those
specified here are carried out, this may result
in hazardous radiation exposure .
■
Never aim the laser beam at reflective surfaces,
people or animals . Even brief visual contact
with a laser beam can result in eye injuries .
Original accessories/additional
equipment
■
Only use the accessories and additional
equipment that are specified in the operat-
ing instructions and are compatible with
the appliance.
Information on saw blades
The Parkside basic equipment includes saw blades
for use with wood and metal .
▯
3 saw blades for general wood cuts
▯
1 saw blade for light metals up to 3 mm
NOTE
►
You can also use any other saw blades pro-
vided they are fitted with a suitable mounting
(single-lug shank) .
Saw blade type
suitable
unsuitable
GB │ IE │ NI
│
5
■