Table of Contents
Advertisement
Switching On the Projection TV and Automatically Tuning
The first time you switch on your TV, a sequence of menu screens appear on the TV enabling you to choose the language of
the menu screen and search and store all available channels (TV Broadcast).
However, if you need to change any of these settings at a later date, you can do that by selecting the appropriate option in
the
(Set Up menu) or by pressing the Auto Start Up Button
1
Connect the Projection TV plug to the mains socket (220-240V AC, 50Hz)
The first time that the TV set is connected, it is usually turned on. If the TV is off,
press the
The first time you switch on the TV, a Language menu displays automatically on
the TV screen.
2
Press the
the OK button to confirm your selection. From now on all the menus will appear
in the selected language.
3
The Auto Tuning menu appears on the screen. Press the OK button to select Yes.
4
The projection TV starts to automatically search and store all available broadcast
channels for you as follows:
a) The Digital autotune display appears on screen and the search and store
procedure begins. All the available Digital channels will now be captured and
stored. As this may take some time, a message is included in the display to
inform you of the tuning progress.
b) When Digital tuning is complete, the analogue display appears automatically
and the search and store procedure for the analogue channels begins.
Your projection TV is now ready for use.
on/off button on the TV set to turn on the TV.
v
V
or
button on the remote control to select the language, then press
• This procedure could take some minutes. Please be patient and do not
press any buttons, otherwise automatic tuning will not be completed.
• If no Digital and no Analogue channels were found during the auto
tuning process then a new menu appears automatically on the screen
asking you to connect the aerial. Please connect the aerial (see page 8)
and press OK. The auto tuning process will start again.
• Once all Digital and Analogue channels have been captured and
stored, the TV returns to normal operation and displays the Digital
channel captured on channel number 1.
If no Digital channels are captured, the Analogue channel that is
stored on channel number 1 is displayed.
/
on the TV set.
Language
Language
English
English
Norge
Norge
Français
Français
Italiano
Italiano
Nederlans
Nederlans
Select Language:
Confirm: OK
Select Language:
Confirm: OK
Language
English
Norge
Français
Italiano
Nederlans
Select Language:
Confirm: OK
GB
Do you want to start
automatic tuning?
Yes
No
Tuning the Digital Channels
Auto Tuning
The number of stored services
16
0%
100%
Searching. . .
63 %
Press Blue key to cancel Auto Tuning.
Cancel
Tuning the Analogue Channels
Auto Tuning
Programme:
1
Channel:
C 01
Searching...
No channel found
Please connect aerial
Confirm
9
First Time Operation
Advertisement
Table of Contents
