Remote Control Configuration For Vcr/Dvd - Sony KP-44DX2 Operating Instructions Manual

Remote Control Configuration for VCR/DVD

In it's default condition this remote control will operate the basic functions of this Sony TV, Sony DVDs and most Sony VCRs. To
control VCRs and DVDs of other manufacturers (and some Sony VCR models), please complete the following steps:
• Before you start, look up the 3 digit code for your brand of DVD or VCR from the list below. On those brands that have
more than one code, enter the first code number.
• Sony will endeavour to update the software according to market changes. Therefore, please refer to code table included
with the remote control for latest code set.
To do this:
1
Press the Media Selector button on the remote control repeatedly until the required green light (VCR or
DVD) is lit.
2
Before the green light goes out, press and hold the YELLOW button for approximately 6 seconds until the
green light starts flashing.
3
Whilst the green light is flashing, enter all three digits of the code for your brand of VCR or DVD using
the number buttons on the remote control.
4
Turn on your VCR or DVD and check that the main functions work.
5
When you wish to use the remote control to operate the TV again, press the Media Selector button until
the TV green light illuminates. Don't forget to select VCR or DVD using the Media Selector button every
time you wish to operate that equipment with this remote control.
VCR Brand List
Brand Code
SONY (VHS) 301, 302, 303, 308, 309
SONY (BETA) 303, 307, 310
SONY (DV) 304, 305, 306
AIWA 325, 331, 351
AKAI 326, 329, 330
DAEWOO 342, 343
GRUNDIG 358, 355, 360, 361, 320, 351
HITACHI 327, 333, 334
JVC 314, 315, 322, 344, 352, 353, 354, 348, 349
LG 332, 338
LOEWE 358, 355, 360, 361, 320, 351
MATSUI 356, 357
ORION 328
PANASONIC 321, 323
PHILIPS 311, 312, 313, 316, 317, 318, 358, 359
SAMSUNG 339, 340, 341, 345
SANYO 335, 336
SHARP 324
THOMSON 319, 350
TOSHIBA 337
34
Additional Information
If Media Selector is on TV position, code numbers will not be stored.
If your selected code is entered correctly, all three green lights will be lit momentarily.
• If your device is not working or some of the functions do not work please check that you entered
the correct code set or try the next code listed against the brand.
• Your brand codes may be lost if weak batteries are not replaced within a few minutes. To reset
your brand of DVD or VCR please repeat the above steps. A small label is added inside the battery
door to allow you to record your brand codes.
• Not all brands are covered and not all models of every brand may be covered.
DVD Brand List
Brand Code
SONY 001
AIWA 021
DENON 018, 027, 020, 002
GRUNDIG 009, 028, 023, 024, 016, 003
HITACHI 025, 026, 015, 004
JVC 006, 017
KENWOOD 008
LG 015, 014
LOEWE 009, 028, 023, 024, 016, 003
MATSUI 013, 016
ONKYO 022
PANASONIC 018, 027, 020, 002
PHILIPS 009, 028, 023, 024, 016, 003
PIONEER 004
SAMSUNG 011, 014
SANYO 007
SHARP 019, 027
THOMSON 012
TOSHIBA 003
YAMAHA 018, 027, 020, 002