MSI MS-98L2 Manual page 50

BIOS Setup
► Console Redirection Settings
► Terminal Type
To operate the system's console redirection, you need a terminal supporting
ANSI terminal protocol and a RS-232 null modem cable connected between
the host system and terminal(s). This setting specifies the type of terminal
device for console redirection.
► Bits per second, Data Bits, Parity, Stop Bits
This setting specifies the transfer rate (bits per second, data bits, parity,
stop bits) of Console Redirection.
► Flow Control
Flow control is the process of managing the rate of data transmission
between two nodes. It's the process of adjusting the flow of data from one
device to another to ensure that the receiving device can handle all of the
incoming data. This is particularly important where the sending device is
capable of sending data much faster than the receiving device can receive
it.
Legacy Console Redirection
► Legacy Console Redirection Settings
► Redirection COM Port
This setting specifies the COM port for redirection.
► Resolution
This setting specifies the redirection resolution of legacy OS.
► Redirect After POST
This setting determines whether or not to keep terminals' console redirection
running after the POST has booted.
3-16